Polski
Fora
Członkowie
mchahn
Aktywność
 
Notifications
Clear all
mchahn
mchahn
Grupa: Zarejestrowany
Dołączył: 2021/07/26
Trusted Member
3
Profil Aktywność
> Ender 3 V2 on left, your settings on the right Thanks, ...

In forum PrusaSlicer

 3 years temu
My printer was set to a 35% feed rate with the M220 command....

In forum PrusaSlicer

 3 years temu
> if you're using a Prusa printer. I'm not printing this ...

In forum PrusaSlicer

 3 years temu
Didn't mean to be a dick. I am curious though what you mea...

In forum PrusaSlicer

 3 years temu
My slicer version is 2.3.1 + win64.

In forum PrusaSlicer

 3 years temu
Thanks. I'm not sure how I was supposed to know that 🙂 ...

In forum PrusaSlicer

 3 years temu
Print time estimate is bonkers

In forum PrusaSlicer

 3 years temu
I don't really need to post pics. The result was pretty muc...

In forum PrusaSlicer

 3 years temu
I'm pretty sure you've given me what I need. I should have ...

In forum PrusaSlicer

 3 years temu
Thanks, but how do I add gcode based on the filament selecte...

In forum PrusaSlicer

 3 years temu
I don't need any advice on whether Z should be adjusted. As...

In forum PrusaSlicer

 3 years temu
You can check to see if it needs cleaning instead of a fixed...

In forum Hardware, firmware and software help

 3 years temu
For the curious and lurkers: I solved my problem nicely usi...

In forum PrusaSlicer

 3 years temu
I am happy to find that the community here is so helpful. I...

In forum PrusaSlicer

 3 years temu
@joantabb, I see the difference in the two right blocks now....

In forum PrusaSlicer

 3 years temu
@joantabb, I see the difference in the two right blocks now....

In forum PrusaSlicer

 3 years temu
I apologize in advance for my newbieness. When I slice the ...

In forum PrusaSlicer

 3 years temu
>Don't support bridges It was already set. It must not...

In forum PrusaSlicer

 3 years temu
I need help controlling supports in my design

In forum PrusaSlicer

 3 years temu
Strona 3 / 3
Share: