Deutsch
Foren
Mitglieder
mchahn
Aktivität
 
Benachrichtigungen
Alles löschen
mchahn
mchahn
Gruppe: Registriert
Beigetreten: 2021/07/26
Trusted Member
3
Profil Aktivität
> Ender 3 V2 on left, your settings on the right Thanks, ...

Im Forum PrusaSlicer

 Vor 3 years
My printer was set to a 35% feed rate with the M220 command....

Im Forum PrusaSlicer

 Vor 3 years
> if you're using a Prusa printer. I'm not printing this ...

Im Forum PrusaSlicer

 Vor 3 years
Didn't mean to be a dick. I am curious though what you mea...

Im Forum PrusaSlicer

 Vor 3 years
My slicer version is 2.3.1 + win64.

Im Forum PrusaSlicer

 Vor 3 years
Thanks. I'm not sure how I was supposed to know that 🙂 ...

Im Forum PrusaSlicer

 Vor 3 years
Print time estimate is bonkers

Im Forum PrusaSlicer

 Vor 3 years
I don't really need to post pics. The result was pretty muc...

Im Forum PrusaSlicer

 Vor 3 years
I'm pretty sure you've given me what I need. I should have ...

Im Forum PrusaSlicer

 Vor 3 years
Thanks, but how do I add gcode based on the filament selecte...

Im Forum PrusaSlicer

 Vor 3 years
I don't need any advice on whether Z should be adjusted. As...

Im Forum PrusaSlicer

 Vor 3 years
You can check to see if it needs cleaning instead of a fixed...

Im Forum Hardware, firmware and software help

 Vor 3 years
For the curious and lurkers: I solved my problem nicely usi...

Im Forum PrusaSlicer

 Vor 3 years
I am happy to find that the community here is so helpful. I...

Im Forum PrusaSlicer

 Vor 3 years
@joantabb, I see the difference in the two right blocks now....

Im Forum PrusaSlicer

 Vor 3 years
@joantabb, I see the difference in the two right blocks now....

Im Forum PrusaSlicer

 Vor 3 years
I apologize in advance for my newbieness. When I slice the ...

Im Forum PrusaSlicer

 Vor 3 years
>Don't support bridges It was already set. It must not...

Im Forum PrusaSlicer

 Vor 3 years
I need help controlling supports in my design

Im Forum PrusaSlicer

 Vor 3 years
Seite 3 / 3
Teilen: